Feb 012010
 

If you can reduce your energy consumption then you can reduce the size and cost of your solar power system. Using a DIY solar power home guide will also help reduce the cost by about 25 percent. When combined with the efforts of others, you can make a significant difference on a global scale by adopting responsible energy habits. Here are 3 steps you can take to save money and energy and reduce your CO2 emissions.

Step 1: Watch your thermostat – Lowering your thermostat is the quickest way to reduce your heating bills. By lowering your thermostat in the winter, and raising it in the summer, by just 1 degree you will save about 2 percent on your energy bill. Use a programmable thermostat and set it 10 degrees colder when you’re sleeping or away from home and if there is no chance of your pipes freezing turn it off altogether.

Step 2: Know your water heater – Switching to a highly efficient on-demand water heating unit, uses about half the energy of a conventional water heater. Cover your water heater in an insulating wrap and lower the temperature as much as possible. By reducing your water heater’s setting by just 1 degree Fahrenheit could lower your energy bill by 1 percent. Using a low-flow shower head is another great way to save hot water. If you are going away for any length of time, shutting off your hot water system just makes sense.

Step 3: Get an energy audit – Professional energy auditors can help you identify the best ways to spend your energy improvement dollars. An energy auditor will come into your home and inspect each room using tools like infrared cameras to check for insulation voids inside a wall, and a blower to test for air leaks. Always make sure you ask the auditor if you will get a written report, how much it will cost and what tests they will conduct. The typical home saves about one-third of its energy costs after having and audit done.

Author: Matt J Staffanson
Article Source: EzineArticles.com
Provided by: Excise Tax

Matt J Staffanson

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

(required)

(required)